> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.teeinblue.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# All about Campaign 2.0

In September 2021, we released a major update for the way teeinblue creates a Campaign, along with some new features.
This article will help you catch up faster with the update, from [the reason we have this change](https://support.teeinblue.com/en/article/all-about-campaign-20-1xd3gk/?bust=1631856547264#1-why-changes), [what is changed](https://support.teeinblue.com/en/article/all-about-campaign-20-1xd3gk/?bust=1631856547264#1-why-changes), to [what you need to do](https://support.teeinblue.com/en/article/all-about-campaign-20-1xd3gk/?bust=1631856547264#1-what-you-need-to-do).

# WHY CHANGES? 
The change was carefully considered, based on many users' feedback. 
Overall, the main purposes of this change are:
* To give users more freedom to **sell different artworks** in a campaign.
* To support more seller cases, including selling products with **multiple sizes** (canvas, poster...).
* To give users more power to **decide the order design**.

# WHAT CHANGES?
# ${color}[#0d268f](1. Select different Artworks for each Printareas)

1. **${color}[#0d268f](Select any artworks:)**

${color}[#6b6b6b](**Before**:) 
* ${color}[#6b6b6b](Add artwork → add product → select artwork for each printarea & could only select among the added artworks.)
* ${color}[#6b6b6b](Could only add max 3 artworks.)

**Now**:
* Add product → Add artwork for each printareas. 
* Can ++select any artwork in Artworks list++.
* Maximum number of artworks can be added is equal to number of printareas.
* An artwork can be added multiple times.

![New campaign editor](https://storage.crisp.chat/users/helpdesk/website/6085dc2a7293d800/image_s58gkl.png)

**Benefit from this change:**
* Less steps to create a campaign + More free to add artworks.

---

2. **${color}[#0d268f](Personalization form changes according to the selected product base)**

${color}[#6b6b6b](**Before**: )
* ${color}[#6b6b6b](Personalization form contained all personalization options from all artworks added to campaign. )
* ${color}[#6b6b6b](All product bases in a campaign shared the same personalization form.)

**Now**: 
* Can add different artworks in each product bases. 
* Personalization form depends on the artworks added to the product base. 
* ++Switching product bases will show different personalization form++.

![New campaign editor](https://storage.crisp.chat/users/helpdesk/website/6085dc2a7293d800/image_sryk3.png)

**Benefit from this change:**
* Can sell different designs for different product bases within a campaign.
Eg. Selling a "Dog" artwork on the Tshirt, and selling a "Cat" artwork on the Mug, within the same campaign.
* If different product bases share the same artwork, personalization form is the same (what customers fill in the form will be saved when switching product bases).

---

3. **${color}[#0d268f](Not show duplicate options from the same artworks)**

${color}[#6b6b6b](**Before**: )
* ${color}[#6b6b6b](Adding the same artwork 2 times showed duplicate personalization options in personalization form.)

**Now**: 
* If the same artwork is added to multiple printareas of a product base, ++personalization options from the same artwork only show once++ in the personalization form, not duplicated.

![New campaign editor](https://storage.crisp.chat/users/helpdesk/website/6085dc2a7293d800/image_1xvg7a0.png)

**Benefit from this change:** 
* Can create a campaign with the same artwork on multiple printareas of a product base, the personalization form still shows fields from the same artwork once.
Eg. Selling a Garden Flag with the same artwork on front & back, and what customers fill in the personalization form will apply for both front & back side.

---

# ${color}[#0d268f](2. Render order design based on printarea, not artwork)

${color}[#6b6b6b](**Before**:)
* ${color}[#6b6b6b](Order design was rendered according to artwork. Number of artworks added to campaign decided number of order design.)
${color}[#6b6b6b](eg. One artwork added, and linked to 2 printareas → 1 order design.)

**Now**:
* ++Order design is rendered according to printarea++. Number of printareas, which contains an artwork, decides number of order design.
eg. 2 printareas selects the same artwork → 2 order design.
* Printareas not having any artwork added will return no order design.

![New campaign editor](https://storage.crisp.chat/users/helpdesk/website/6085dc2a7293d800/image_152vsb3.png)

**Benefits from this change**:
* Render correct design files.
* Can sell the same artwork for multiple printareas.
Eg. Selling a T-shirt with the same artwork on front & back.

---

# ${color}[#0d268f](3. Locate artwork position in printarea)

${color}[#6b6b6b](**Before**: )
* ${color}[#6b6b6b](Order design was created by placing artwork to the printarea. )
* ${color}[#6b6b6b](Artwork fitted to printarea by scaling up or scaling down until it matched width or height of the printarea. )
* ${color}[#6b6b6b](No part of artwork was cut off, so there might be some blank area if the artwork's ratio was different from printarea's.)
* ${color}[#6b6b6b](This action was done automatically, users could not change it.)

**Now**:
* (same) Order design is still created by placing artwork to the printarea. 
* (same) By default, artwork still automatically fits to printarea by scaling up or down to match width or height.
* Users have ++an editor to adjust how artwork places in printarea++. Users can resize and reposition artwork to leave out no blank area.

![Locate artwork position in printarea](https://storage.crisp.chat/users/helpdesk/website/6085dc2a7293d800/image_1dmlgev.png)

* This change will ++apply on mockup and order design++.
![](https://storage.crisp.chat/users/helpdesk/website/6085dc2a7293d800/image_8b8s2a.png)

| Read detailed instruction: [Locate Artwork](https://support.teeinblue.com/en/article/locate-artwork-in-printarea-1grzjp0/?bust=1632280466826)

**Benefit from this change**:
* Can decide the artwork position in order design
* Can use the same artwork for multiple printareas having small difference in ratio, such as portrait poster 18x24 & 24x36...

---

# ${color}[#0d268f](4. Custom variant's printarea)

1. **${color}[#0d268f](Setup custom printarea for variants:)**

${color}[#6b6b6b](**Before**:)
* ${color}[#6b6b6b](Default printareas were listed in Printareas section in Product Base.)
* ${color}[#6b6b6b](If a variant has different printarea size, users need to create a custom printarea with different size, based on the default printareas.)

**Now**:
* All printareas, including default and custom, will be ++listed in Printareas section++ in Product Base.
* Users will ++enable the "Custom variant's printarea" toggle++ when a product base has different printarea sizes for variants.
* Users will ++connect a variant to a printarea by selecting a custom printarea in Variants table++.

![](https://storage.crisp.chat/users/helpdesk/website/6085dc2a7293d800/image_1whe0fq.png)

---

2. **${color}[#0d268f](Personalization form & mockups depend on variant's printarea:)**

In campaign, users can add different artworks for each custom printarea. When a variant is selected, teeinblue will find what printarea is connected to that variant, and what artwork is added to that printarea. Then:
* Depending on the selected variant, personalization form only shows fields from the artwork added to that variant's printarea.
* Gallery only shows mockups sharing the same artwork.
---

3. **${color}[#0d268f](Order design depends on variant's printarea:)**
* When customers place an order with a variant, which is connecting to a printarea, there'll be only one order design generated based on the connected printarea.

| Read detailed instruction here: [Custom Variant's Printarea](https://support.teeinblue.com/en/article/custom-variants-printarea-5plxay/?bust=1632197034293).

**Benefits from this change**:
* Can sell multi-size products with different artwork ratio.


---

# ${color}[#0d268f](5. Update Product Base's Catalog)

* To work with the new Custom variant's, we have made a change for imported products. When you import a product, all of its printareas (which are required from fulfillment provider) will now be listed in Printareas section.

---

# ${color}[#0d268f](6. Better preview & UI/UX)
* To bring the most accurate preview as possible, "Step 2: Preview your campaign" are re-made to display the same as on storefront. Including: mockups, variant options, personalization form, description...
* "Step 3: Configure Additional Information" is moved to "Edit campaign info". Click on the button to show the configuration to update Shopify product's info.
* In Product Base's Variants table, need to enable "Custom variant's printarea" toggle to show "Connect custom printarea" column.
* Add some notices and warning messages while setting up Campaign.
* Restyle some components.

---


# WHAT YOU NEED TO DO?
1. **Nothing for the old campaigns:**
* All changes are applied automatically, you don't need to do anything to update to new version.
* **Old campaigns & orders are not affected**. You might find some changes in portal, but they don't affect how your old campaigns are running and how the orders from the old campaign will be generated.

2. **For new campaigns:**
* Make sure you read through all the updates in the "What changes" part above.
* Import new product base when creating new campaign, should NOT edit old product base.
* Add correct artwork to correct printarea. Printarea now decides order design, and printarea without an artwork will not be rendered.