Custom Variant's Printarea
Some products do not have a fixed printarea size. Instead, each variant may require a different printarea size.
For example:
- Posters/Canvas: A product may have variants in different sizes, such as 10 × 10 in, 12 × 18 in, and 30 × 20 in. Each variant requires a different printarea width and height.
- Mugs: A product may have 11 oz and 15 oz variants. The 15 oz mug may require a taller printarea than the 11 oz mug.
Acknowledging this case, Teeinblue allows you to create custom printareas with unique sizes for individual variants. This ensures that when a customer places an order, the order design is generated using the correct printarea size for the selected variant. For example, within the same campaign, an order for a 10 × 10 in poster should generate a 3000 × 3000 px design, while an order for a 30 × 20 in poster should generate a 9000 × 6000 px design.
Follow the steps below to create custom printareas and connect them to the corresponding variants.
Step 1. Create all printareas in Printareas section
Go to Product Base → Printareas → create all custom printareas.
For example, suppose you want to sell a poster with three variants: 8 × 10 in, 12 × 16 in, and 24 × 16 in. Your fulfillment provider requires a specific printarea name and size for each variant:
- Poster 8 × 10 in: Printarea name =
8x10; printarea size =2400 × 3000 px - Poster 12 × 16 in: Printarea name =
12x16; printarea size =3600 × 4800 px - Poster 24 × 16 in: Printarea name =
24x16; printarea size =7200 × 4800 px
You will need to create three corresponding printareas:
- Printarea
8x10: Width =2400; Height =3000 - Printarea
12x16: Width =3600; Height =4800 - Printarea
24x16: Width =7200; Height =4800

After creating all the required printareas, you can connect each one to the corresponding variant.
Step 2. Connect variants to printareas in the Variants table
- Go to Product Base → Variants and enable the Custom variant's printarea toggle.
- Once toggle is enabled, a column named Connect custom printarea will appear in the Variants table.

- Click a field in the Connect custom printarea column to display a list of printareas created in Step 1.

- Select the correct printarea for each variant in the corresponding row. Please ensure to connect at least a printarea to every variant.

To remove a connected printarea, click the field again to clear it.

Connect multiple printareas to one variant
By default, you may connect one variant to one printarea (for example, the Landscape variant to the Landscape printarea). However, you can also connect multiple printareas to a single variant if you want that variant to generate multiple designs.

- How to set up: In the Connect custom printarea column, click the field and select all relevant printareas from the dropdown list.
- Result: When a customer selects this variant on your storefront, the personalization form will display the artwork fields for all connected printareas.
Example: If you sell a set of three ornaments as a single variant, you can connect it to the Pack 1, Pack 2, and Pack 3 printareas. Customers will then see the customization options for all three packs on the same page. Please check this article for more details.
Step 3. Select artwork for each printarea in Campaign
- Go to Campaigns → Create a new campaign

- In
Step 1: Add products & artworks, add a product base. All printareas associated with that Product Base will then be displayed.


- Select an artwork for each printarea.

You can locate artwork in each printarea if necessary.
When a customer selects a variant, Teeinblue identifies the printarea connected to that variant and the artwork assigned to that printarea. As a result, the personalization form displays only the fields from the artwork assigned to the selected variant's printarea.

Step 4: Launch your campaign
Once finishing adding artwork, you can publish your campaign. Then, kindly double-check your storefront to make sure all is good.
On the storefront, the gallery will hide mockups that do not contain the same artwork as the selected variant. This prevents situations where customers fill out the personalization form but the displayed mockup does not update to reflect the selected variant.

- When a customer places an order, Teeinblue identifies the printarea connected to the ordered variant and generates the corresponding order design based on that printarea's size and the artwork assigned to it.

Updated on: 28/10/2026
Thank you!
